Section 7 (Air Conditioning): Condenser: Reassembly

WARNING: This page is about a different car, the 2008 Scion xB. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL COOLER DRYER
1. Using pliers, install the cooler dryer onto the modulator.
  
  Fig 1: Installing Cooler Dryer Onto Modulator
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply sufficient compressor oil to the O-ring and the fitting surface of the cap.
  Compressor oil: ND-OIL 8 or equivalent
  
  Fig 2: Locating O-Ring On Compressor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Using a 14 mm straight hexagon wrench, install the cap onto the cooler condenser core.
  Torque: 2.9 N*m (30 kgf*cm, 26 in.*lbf)
  
  Fig 3: Installing Cap Onto Cooler Condenser Core
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 COOLER CONDENSER CUSHION
1. Install the 4 cooler condenser cushions.
  
  Fig 4: Identifying Cooler Condenser Cushions
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002