LEMON Manuals: Even more car manuals for everyone
Home >> Scion >> 2009 >> tC Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> Heater Control Assembly >> Removal

Heater Control Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)  (See REMOVAL )
  3. REMOVE CONSOLE PANEL UPPER FRONT  (See REMOVAL )
  4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY 
    1. Detach the 9 claws.
      NOTE: If the heater control is removed with the cover open, it may be broken. Be sure the cover is closed when removing it.
    2. Disconnect the connector, then remove the heater control.
      Fig 1: Identifying Instrument Cluster Finish Panel Assembly With Claws
      G05540793Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals