LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2005 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Automatic Transmission - Introduction & Repair Instructions) >> Repair Instructions >> Shift Control Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn Ion 3, 2005 Saturn Ion 2, and 2005 Saturn Ion 1. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shift control to the vehicle.
  2. Connect the shift lock solenoid harness connector.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the shift control nuts.

    Tighten:  Tighten the shift control nuts to 25 N.m (18 lb ft).

  4. Connect the shift cable to the shift control assembly.
    5. Fig 1: View Of Shift Control
    GM851244Courtesy of GENERAL MOTORS CORP.
  5. Install the console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals