LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2004 >> Ion Red Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Frame And Underbody) >> Repair Instructions >> Splash Shield Replacement - Engine >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Saturn Ion Red Line, 2007 Saturn Ion 3, and 2007 Saturn Ion 2. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Splash Shield & Retainers
    GM851684Courtesy of GENERAL MOTORS CORP.
  1. Install the engine splash shield by inserting the push-in retainers.
    2. NOTE: Refer to Fastener Notice .
  2. Install the air cleaner intake duct bolt.

    Tighten:  Tighten the bolt to 10 N.m (88 lb in).

  3. Install the front fender liner. Refer to Front Fender Liner Replacement 
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals