Removal Procedure
- Apply the parking brake.
- Shift the transmission to neutral (N).
- Remove the console. Refer to CONSOLE REPLACEMENT - FRONT FLOOR
in Instrument Panel, Gages and Console.
Courtesy of GENERAL MOTORS CORP.
- Lift up the cable retainers.
- Disconnect cable ends from the shift control assembly, noting the location for assembly.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the cable ends from the transmission shift levers, noting the location for assembly.
- Remove the shift cable from the transmission cable bracket.
- Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE
in General Information.
- Remove the shift cable attachment nut from the underbody.
- Lower the vehicle.
- Remove the left instrument panel closeout panel. Refer to INSTRUMENT PANEL (I/P) TRIM PANEL REPLACEMENT - LEFT
in Instrument Panel, Gages and Console.
- Position the drivers side front carpet aside. Refer to CARPET REPLACEMENT
in Interior Trim.
Courtesy of GENERAL MOTORS CORP.
- Separate the grommet from the floor pan.
- Remove the cable from the vehicle by pulling the cables through the drivers floor opening.