LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> External Pages >> Different car >> Section 304 (Front Suspension) >> Repair Instructions >> Strut, Strut Component and/or Spring Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
  1. Mount the SA9155S  in the holding fixture. See Special Tools and Equipment .
    2. Fig 1: Compressing Strut Assembly
    GM864793Courtesy of GENERAL MOTORS CORP.
  2. Place the strut assembly in the SA9155S  . See Special Tools and Equipment . Use a strut to knuckle bolt and nut through the lower hole.
  3. Use the SA9155S  in order to compress the spring to unload the upper strut mount. See Special Tools and Equipment .
    4. Fig 2: Removing Strut Shaft Nut
    GM864798Courtesy of GENERAL MOTORS CORP.
  4. Remove the strut shaft nut while holding the strut shaft with a TORX™ socket.
    5. Fig 3: Exploded View Of Strut Assembly
    GM898138Courtesy of GENERAL MOTORS CORP.
  5. Release the spring compressor spring and tilt the strut assembly outward.
  6. Remove the upper strut mount assembly. Inspect the upper mount for deterioration, cracking and for smooth bearing operation. Replace if necessary.
  7. Remove the strut coil spring from the strut. Inspect for damage and replace as necessary.
  8. Remove the hollow bumper from the strut. Inspect for deterioration or cracking and replace as necessary.
  9. Remove the strut from the SA9155S  . See Special Tools and Equipment . Inspect the strut shaft for smooth resistance.
scientia non olet · About LEMON Manuals