LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 2002 >> L100 >> Repair and Diagnosis >> External Pages >> Different car >> Section 304 (Front Suspension) >> Repair Instructions >> Lower Control Arm Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Lower Control Arm-To-Frame Bolts
    GM891615Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTIC in Cautions and Notices.
  1. Install the lower control into the frame using new bolts.

    Tighten:  Tighten the bolts to 90 N.m (66 lb ft) plus an additional 75 to 90 degrees.

    2. Fig 2: Connecting Lower Control Arms
    GM891570Courtesy of GENERAL MOTORS CORP.
  2. Install a new ball stud to steering knuckle pinch bolt and nut.

    Tighten:  Tighten the bolt and nut to 100 N.m (74 lb ft).

  3. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  4. Lower the vehicle.
  5. Inspect the vehicle for alignment. Refer to Measuring Wheel Alignment in Wheel Alignment.
scientia non olet · About LEMON Manuals