LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1993 >> SC2 Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Steering System - Power >> Removal & Installation >> Tie Rod End >> Installation

Tie Rod End: Installation

  1. Thoroughly clean and lubricate threads on tie rod end stud. Lubricate threaded part of stud only. Install tie rod end stud into steering knuckle.
  2. Install and tighten tie rod end castle nut to specification. See TORQUE SPECIFICATIONS TABLE  at the end of this article. If hole in castle nut is not aligned with hole in stud, tighten nut further, but only as far as necessary to install cotter pin. DO NOT  loosen nut to align holes. Install NEW cotter pin. Set toe as necessary.
scientia non olet · About LEMON Manuals