LEMON Manuals: Even more car manuals for everyone
Home >> Saturn >> 1992 >> SC Standard >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Servicing - A/T >> Adjustments >> Park Lock Cable Adjustment & Testing

Park Lock Cable Adjustment & Testing

  1. Lift lock tab on cable end and ensure cable housing slides freely through lock housing. On 1991 models, DO NOT  turn ignition on. On 1992 models, turn ignition on. On all models, adjust cable housing so that a 0.05" (1.25 mm) gap exists between cable end and connector.
  2. With ignition off and shifter in Park position, attempt to shift lever out of Park. Lever should not move. Turn ignition on. Shift lever should be allowed out of Park.
  3. Place shift lever in any position except Park and turn ignition off. Ignition key should not be removable. Attempt to place shift lever in Park. Lever should go into Park position and ignition key should be able to be removed. If park lock cable fails any test, readjust cable. Check gearshift cable adjustment. See GEARSHIFT CABLE  .
scientia non olet · About LEMON Manuals