LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2011 >> 9-3X Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Glass, Windows And Mirrors) >> Repair Instructions >> Programming the remote control, garage door opening >> Reprogramming a button

Reprogramming a button

WARNING: This page is about a different car, the 2009 Saab 9-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition ON.
  2. Press and hold the desired button on the rearview mirror for the entire programming procedure.
  3. The LED will start to flash slowly after 20 seconds.
    Fig 1: LED Will Start To Flash Slowly After 20 Seconds
    G05042680Courtesy of SAAB-SCANIA OF AMERICA, INC.
  4. Hold the garage door remote control 3-7 cm from the rearview mirror and press the button on the remote control.
    Fig 2: Pressing Remote Control Button
    G05125479Courtesy of SAAB-SCANIA OF AMERICA, INC.
  5. Reprogramming is complete when the LED starts to flash rapidly.

    The previous frequency is now erased and replaced by the new one. Reprogramming one button does not affect the other buttons.

scientia non olet · About LEMON Manuals