Control module calibration AHL/AFL

Check the following points before starting calibration.

• The car should be level.
• The car should be unloaded.
• Check that the light image has not been reset to the right-hand/left-hand traffic "tourist solution"
• Stabilize the suspension by rocking the car.
• The handbrake must not be applied.
• Steering wheel and wheels in straight-ahead position.
• Ignition in ON position
• The Xenon lamps should be lit.
• Battery voltage must be >10.5 V.

Connect the diagnostic tool and calibrate the AHL/AFL control module.

Check the function of the headlamps and clear any DTCs.

Check the light setting and adjust as necessary, see LIGHT SETTING, HEADLAMPS (US/CA) .