LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2006 >> 9-3 2.0T, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> TRIONIC T8 Fuel Control System >> Repair Instructions >> Upper heated oxygen sensor (592) >> To remove

To remove

  1. Unplug the oxygen sensor and carefully lower the cable.
    Fig 1: Removing Oxygen Sensor Connector
    G05052387Courtesy of SAAB-SCANIA OF AMERICA, INC.
  2. Remove the heat shield over the turbocharger (note the clip underneath the heat shield, see illustration).
  3. Remove the oxygen sensor.
    Fig 2: Removing Upper Heated Oxygen Sensor
    G05052388Courtesy of SAAB-SCANIA OF AMERICA, INC.
scientia non olet · About LEMON Manuals