LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 2005 >> 9-7X Linear >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Sir >> Repair Instructions >> Inflatable Restraint Roof Rail Module Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Forward Curtain Clip & Air Bag Module Bolts
    GM1276868Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the 3 bolts (1, 3) retaining the roof rail air bag module to the roof.

    Tighten:  Tighten the roof rail air bag module bolts to 9 N.m (79 lb in).

  2. Install the forward curtain clip (2).
  3. Install the bolt retaining the bracket to the roof.
    4. Fig 2: View Of Pillar Clips
    GM1276879Courtesy of GENERAL MOTORS CORP.
  4. Install the 3 bolts retaining the rear curtain to the roof.

    Tighten:  Tighten the roof rail air bag curtain bolts to 9 N.m (79 lb in).

    5. Fig 3: View Of Roof Rail Module Connector
    GM1276857Courtesy of GENERAL MOTORS CORP.
  5. Install the clips (3) to the pillar.
  6. Install the roof rail air bag forward tether bolt (3).

    Tighten:  Tighten the roof rail air bag forward tether bolt to 9 N.m (79 lb in).

  7. Connect the roof rail air bag electrical connector (1).
  8. Install the headliner. Refer to Headliner Replacement in Interior Trim.
  9. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 2  and SIR Disabling and Enabling Zone 6 .
  10. Install the head restraints from the front seats. Refer to Head Restraint Replacement - Front Seat in SIR.
scientia non olet · About LEMON Manuals