Read Current Data
On the << Main Menu >> display screen, select the {Each System Check}.
On the << System Selection Menu >> display screen, select the {Brake Control System}.
Select the {OK} after the information of ABS type is displayed.
On the << Brake Control Diagnosis >> display screen, select the {Current Data Display & Save}.
On the << Data Display Menu >> display screen, select the {Data Display}.
Using the scroll key, move the display screen up or down until desired data is shown.
- A list of the support data is shown in the following table.
SUPPORT DATA CHART
| Display screen | Contents to be monitored | Unit of measure |
|---|---|---|
| FR Wheel Speed | Wheel speed detected by Front ABS wheel speed sensor RH is displayed | km/h or MPH |
| FL Wheel Speed | Wheel speed detected by Front ABS wheel speed sensor LH is displayed | km/h or MPH |
| RR Wheel Speed | Wheel speed detected by Rear ABS wheel speed sensor RH is displayed | km/h or MPH |
| RL Wheel Speed | Wheel speed detected by Rear ABS wheel speed sensor LH is displayed | km/h or MPH |
| Stop Light Switch | Stop light switch signal | ON or OFF |
| G Sensor Output Signal | Voltage equivalent to vehicle acceleration detected by analog G sensor is displayed. | m/s (m/s2 ) |
| Valve Relay Signal | Valve Relay Signal | ON or OFF |
| ABS Warning Lamp | ON operation of ABS warning light is displayed. | ON or OFF |
| EBD Warning Light | ON operation of EBD warning light is displayed. | ON or OFF |
| Motor Relay Monitor | Motor relay monitor voltage is displayed. | V |
| IG power supply voltage | Voltage supplied to ABSCM&H/U is displayed. | V |
| ABS Control Flag | ABS control condition is displayed. | ON or OFF |
| ABS OK B Signal | ABS system normal/abnormal is displayed. | OK or NG |
NOTE:
For detailed operation procedure, refer to the "VEHICLE DIAGNOSTIC INTERFACE OPERATION MANUAL
".