Tightening Torques
TIGHTENING TORQUES
| Torque (Nm) | Torque (lbf ft) | |
| Exhaust manifold/turbo, studs 4x, 4-cyl. | 22 | 16.2 |
| Exhaust manifold/turbo, locknuts 4x, 4-cyl. | 24 | 17.7 |
| Exhaust manifold/cylinder head, 4-cyl. | 25 | 18.4 |
| Exhaust manifold (rear and front)/cylinder head, V6 | 20 | 14.7 |
| Rear exhaust manifold/front exhaust manifold, V6 | 40 | 29.5 |
| Bypass pipe, hose clip | 8 | 5.9 |
| Bypass pipe/intake pipe, banjo bolt | 8 | 5.9 |
| Front/rear exhaust system | 22 | 16.2 |
| Radiator fan | 8 | 5.9 |
| Intake manifold/U-clamp cylinder head, V6 | 14 | 10.3 |
| Oil pipe to turbo, banjo bolt, turbo | 20 | 14.7 |
| Oil pipe to turbo, banjo bolt oil filter adapter, 4-cyl. | 25 | 18.4 |
| Oil pipe to turbo, banjo bolt oil filter adapter, V6 | 20 | 14.7 |
| Oil pipe from turbo, 2 M6 bolts, turbo | 14 | 10.3 |
| Pipe clamp, rear silencer | 70 | 51.6 |
| Hose clip, intake hose, charge air cooler | 8 | 5.9 |
| Stay, turbo/cylinder block | 24 | 17.7 |
| Power steering pump mounting, 4-cyl. | 24 | 17.7 |
| Power steering pump mounting/motor mounting, 4-cyl. | 24 | 17.7 |
| Oxygen sensor | 55 | 40.5 |
| Turbo/front exhaust system, 3 studs | 22 | 16.2 |
| Turbo/front exhaust system, 3 locknuts | 24 | 17.7 |
| Water return pipe, cylinder head banjo bolt, 4-cyl. | 25 | 18.4 |
| Water return pipe/turbo, banjo bolt | 25 | 18.4 |
| Water pipe to turbo, banjo bolt, turbo | 25 | 18.4 |
| Water pipe to turbo, banjo bolt, coolant pump, 4-cyl. | 20 | 14.7 |
| Water pipe to turbo, retaining screw cylinder head, V6 | 14 | 10.3 |
| Crankcase breather pipe/intake pipe, banjo bolt | 24 | 17.7 |
| V-clamp, turbo/intake pipe | 3 | 2.2 |
| Heat shield, lock nut, 4-cyl. | 20 | 14.7 |
| Heat shield, nut, V6 | 24 | 17.7 |
| Heat shield, stud, V6 | 22 | 16.2 |
NOTE:
In cases where the type of engine is not specified, this means that the tightening torque applies for both the 4-cyl. and the V6 engines.