LEMON Manuals: Even more car manuals for everyone
Home >> Saab >> 1996 >> 9000 CS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - System/Component Tests - 3.0L V6) >> Computerized Engine Controls >> Electronic Control Module (ECM) >> Power Circuit

Power Circuit

WARNING: This page is about a different car, the 1995 Saab 9000. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for battery voltage at ECM terminal No. 18 (Red wire). If battery voltage exists, go to next step. If battery voltage does not exist, repair Red wire between ECM and fuse panel.
  2. Turn ignition on. Battery voltage should exist between ECM terminal No. 46 (Yellow/White wire) and ground. If battery voltage does not exist, repair open in Yellow/White wire.
scientia non olet · About LEMON Manuals