Camber Adjustment (Rear Axle)

Before checking, see WHEEL ALIGNMENT PRELIMINARY CONDITIONS  and WHEEL ALIGNMENT WORK SEQUENCE  .

1. Compress vehicle at front and rear by about 0.984" (25 mm), 2-3 times and allow it to spring back freely.
2. Measure rear camber. If camber needs adjustment, loosen camber eccentric nut (A). See Fig 1 . Camber is adjusted by turning camber eccentric (A). See Fig 2 .
3. Tighten eccentric nut to specification. See TORQUE SPECIFICATIONS  . If camber needed adjustment, recalibrate steering angle sensor. See INITIALIZING & CALIBRATING STEERING ANGLE SENSOR  .

Fig 1: Identifying Rear Camber (A) & Toe (B) Eccentric Fasteners

Courtesy of PORSCHE OF NORTH AMERICA, INC.

Fig 2: Identifying Rear Camber (A) & Toe (B) Eccentric Adjusters

Courtesy of PORSCHE OF NORTH AMERICA, INC.