LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2002 >> 911 GT2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Automatic Transmission, Controls, Case) >> Removing And Installing Selector Support >> Removal

Removing And Installing Selector Support: Removal

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 Porsche Boxster, 2003 Porsche Boxster, 2002 Porsche Boxster, 2001 Porsche Boxster, and 2000 Porsche Boxster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove selector knob. See REMOVING AND INSTALLING SELECTOR KNOB  .
  2. Remove center console. See REMOVING AND INSTALLING CENTRE CONSOLE .
  3. Move selector lever to position "D".
  4. Disengage keylock cable:
    • Open adjuster (3) by pressing the unlocking button (7). See Figure .
    • Press the retaining clip (4) together and carefully pull the adjuster (3) upward out of the support bracket. See Figure .
    • Disengage cable nipple (1) on the keylock lever (2). See Figure .
  5. Disengaging selector lever cable:
    • Slide the locking sleeve of the adjuster forward and turn it clockwise to removal position (8). See Figure .
    • Press the retaining clip (10) together and carefully pull the cable upward out of the support bracket. See Figure .
  6. Disconnect plug connection.
    Fig 1: Disconnecting Plug Connection
    G03102729Courtesy of PORSCHE OF NORTH AMERICA, INC.
  7. Unscrew fastening nuts (11). See Figure .
scientia non olet · About LEMON Manuals