LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2010 >> G6 GT, 2D Convertible, 3.9 1 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 3.9L - Repair Instructions >> Repair Instructions >> Air Cleaner Element Replacement >> Removal Procedure

Removal Procedure

    Fig 1: MAF/IAT Sensor Electrical Connector
    GM1583638Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mass air flow (MAF)/intake air temperature (IAT) sensor harness connector.
    2. Fig 2: Upper Air Cleaner Cover
    GM1236158Courtesy of GENERAL MOTORS CORP.
  2. Remove the upper air cleaner cover screws.
  3. Remove the upper air cleaner cover.
  4. Remove the air cleaner filter from the lower air cleaner housing.
  5. Inspect the air cleaner filter for dust, dirt and water contamination.
  6. Replace as necessary. Refer to Maintenance Schedule (North American Emissions) .
scientia non olet · About LEMON Manuals