Installation Procedure

Fig 1: Identifying Fuel Fill Pipe Hose Clamp & Vapor Recirculation Line Quick Connect Fitting

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to Fastener Caution

Install and connect the fuel fill pipe hose assembly.
Tighten the fuel fill pipe hose clamp (1) at the fuel tank and tighten to 4 N.m (35 lb in).
Connect the vapor recirculation line quick connect fitting (2). Refer to Plastic Collar Quick Connect Fitting Service .

Fig 2: View Of Underbody Fuel Fill Pipe Bolt

Courtesy of GENERAL MOTORS CORP.

Install the fuel fill pipe bolt to the underbody and tighten to 10 N.m (89 lb in).
Position and connect the rear stabilizer shaft. Refer to Stabilizer Shaft Replacement .

Fig 3: View Of Fuel Fill Pipe Bolt & Fuel Fill Pocket

Courtesy of GENERAL MOTORS CORP.

Lower the vehicle.
Install the fuel fill pipe bolt to the fuel fill pocket and tighten to 1.5 N.m (13 lb in).