LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Heat Shield Replacement - Dash Panel >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Dash Panel Heat Shield
    GM1837368Courtesy of GENERAL MOTORS CORP.
  1. Position the dash panel heat shield to the underbody, installing the shield over the stud.
    2. NOTE: Refer to Fastener Notice .
  2. Install the dash panel heat shield nut.

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  3. Install NEW rivets.
  4. Lower the vehicle.
scientia non olet · About LEMON Manuals