LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Torrent Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Catalytic Converter Heat Shield Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Propeller Shaft
    GM935370Courtesy of GENERAL MOTORS CORP.
  1. Remove the muffler assembly. Refer to Muffler Replacement (LNJ)  or Muffler Replacement (LY7) .
  2. If the vehicle is equipped with all wheel drive (AWD) remove the propeller shaft underbody guard loop bolts and guard loop.
    3. Fig 2: View Of Fuel Tank Heat Shield & Fuel Tank Assembly
    GM927748Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Support the fuel tank prior to removing the fuel tank strap bolt.
  3. Remove the right fuel tank strap bolt, which also secures the rear of the catalytic converter heat shield to the underbody.
    4. Fig 3: Identifying Catalytic Converter Heat Shield
    GM1837369Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The heat shields at the dash panel and the catalytic converter overlap and utilizing common rivet attachment points.
  4. Drill out the rivets.
  5. Remove the catalytic converter heat shield.
scientia non olet · About LEMON Manuals