LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2008 >> Grand Prix Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 322 (Power Door Lock System And Release Systems) >> Repair Instructions >> Liftgate Latch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Liftgate Latch Components
    GM824712Courtesy of GENERAL MOTORS CORP.
  1. Install the liftgate latch (3) to the liftgate.
    2. NOTE: Refer to FASTENER NOTICE .
  2. Install the bolts (4) to the liftgate latch (3).

    Tighten:  Tighten the liftgate latch bolts (4) to 7 N.m (62 lb in).

  3. Connect the rod (2) to the lock cylinder. Refer to Liftgate Lock Cylinder Replacement .
  4. Connect the electrical connector (5) to the liftgate latch (3).
  5. Connect the latch cable (1).
  6. Install the liftgate trim panel. Refer to Liftgate Trim Panel Replacement .
  7. Close the liftgate.
scientia non olet · About LEMON Manuals