Installation Procedure

Fig 1: View Of Power Steering Gear, Bolts & Frame

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the power steering gear mounting bolts (2) to the frame (3).
Tighten: Tighten the bolts to 110 N.m (81 lb ft).
Install the power steering hoses to the power steering gear. Refer to the following procedures:
- Power Steering Pressure Pipe/Hose Replacement (3.4L)
- Power Steering Return Hose Replacement (3.4L) .
Install the stabilizer shaft. Refer to Stabilizer Shaft Replacement in Front Suspension.

Fig 2: View Of Power Steering Gear

Courtesy of GENERAL MOTORS CORP.

Install the intermediate steering shaft to the steering gear. Refer to Intermediate Steering Shaft Replacement in Steering Wheel and Column.
Install the tie rod ends to the steering knuckle. Refer to Rack and Pinion Outer Tie Rod End Replacement .
Install the stabilizer shaft links to the control arms. Refer to Stabilizer Shaft Link Replacement in Front Suspension.
Install the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
Lower the vehicle.
Bleed the air from the power steering system. Refer to Bleeding the Power Steering System .