Diagnostic Aids

If DTC B2713 is a history DTC, the fault may be intermittent. Refer to Testing for Intermittent Conditions and Poor Connections in Wiring Systems.
The following conditions may cause an intermittent malfunction to occur:
- An intermittent short to battery voltage in the controlled ground circuit of the A/T shift lock control solenoid
- The A/T shift lock control solenoid coil is shorted to battery voltage internally.
- The BCM is shorted to battery internally.

DTC B2713

Step	Action	Yes	No
Schematic Reference: Automatic Transmission Shift Lock Control Schematics Connector End View Reference: Automatic Transmission Shift Lock Control Connector End Views or Computer/Integrating Systems Connector End Views in Computer/Integrating Systems
1	Did you perform the Diagnostic System Check - Vehicle?	Go to Step 2	Go to Diagnostic System Check - Vehicle in Vehicle DTC Information
2	Turn ON the ignition, with the engine OFF. Press and hold the brake pedal. Attempt to move the gearshift lever from the PARK position. Does the automatic transmission (A/T) shift lock control system operate correctly?	Go to Diagnostic Aids	Go to Symptoms - Automatic Transmission Shift Lock Control