Overhaul - 42LE Automatic Transmission

• Application
• Identification
  • Notes
  • Gear Ratios
• Description
• Operation
• Lubrication
  • Notes
  • Recommended Fluid
  • Fluid Capacities
• On-Vehicle Service
  • Notes
  • Oil Cooler Flushing
    • Notes
    • Flushing Procedure
  • Oil Cooler Flow Check
• Trouble Shooting
  • Preliminary Inspection
  • Symptom Diagnosis
    • Buzzing Noise
    • Buzzing Noise During Shifts Only
    • Delayed Engagement From Neutral To Drive
    • Delayed Engagement From Neutral To Reverse
    • Grating, Scraping Or Growling Noise
    • Hard To Fill With Fluid Or Fluid Blows Out Filler Tube
    • Harsh Downshifts
    • Harsh Engagement From Neutral To Drive
    • Harsh Engagement From Neutral To Reverse
    • Harsh Lock-Up Shift Or Shudder
    • Harsh Upshift
    • High Shift Efforts
    • No Torque Converter Lock-Up
    • No Upshift Into Overdrive
    • Poor Shift Quality
    • Shifts Erratically
    • Transaxle Overheats
    • Vehicle Drags Or Locks
    • Vehicle Moves In Neutral
  • Operation Characteristics At Various Fluid Temperatures
    • Overview
    • Extreme Cold Fluid Less Than -16°F (-26°C)
    • Cold Fluid -12°F (11°C) To Less Than 36°F (2°C)
    • Warm Fluid 36°F (2°C) To Less Than 80°F (27°C)
    • Hot Fluid 80°F (27°C) To Less Than 250°F (121°C)
    • Overheated Fluid Greater Than 240°F (116°C)
    • Super Overheated Fluid Greater Than 260°F (127°C)
• Performance Tests
  • Road Test
  • Hydraulic Pressure Tests
    • Pressure Test Preparation
    • Low-Reverse Clutch Pressure Test
    • Underdrive Clutch Pressure Test
    • Overdrive Clutch Pressure Test
    • 2-4 Clutch Pressure Test
    • Torque Converter Clutch Pressure Test
    • Reverse Clutch Pressure Test
    • Pressure Test Result Diagnosis
  • Clutch Air Pressure Tests
    • Notes
    • Test Preparation
    • Overdrive Clutch
    • Reverse Clutch
    • 2-4 Clutch
    • Low-Reverse Clutch
    • Underdrive Clutch
• Components Tests
  • Torque Converter
• Removal & Installation
  • Notes
  • Axle Shafts
  • Input Speed Sensor
    • Removal & Installation
  • Long Stub Shaft Oil Seal
    • Notes
    • Removal
    • Installation
  • Short Stub Shaft Oil Seal
    • Notes
    • Removal
    • Installation
  • Transmission Range Sensor
    • Removal & Installation
  • Oil Pump Seal
    • Removal & Installation
  • Output Speed Sensor
    • Removal & Installation
  • Solenoid Assembly
    • Removal & Installation
  • Transaxle
  • Transfer Shaft Oil Seals
    • Notes
    • Removal
    • Installation
  • Valve Body
    • Removal
    • Installation
• Transaxle Disassembly
  • Valve Body & Internal Components
  • Differential Assembly, Transfer Shaft & Components
    • Notes
    • Preliminary Inspection
    • Removal
• Component Disassembly & Reassembly
  • Differential Assembly
    • Disassembly
    • Reassembly
  • Input Clutch Assembly
    • Notes
    • Disassembly
    • Reassembly
    • Checking Underdrive Clutch Clearance
    • Overdrive Clutch Reassembly
    • Checking Overdrive Clutch Clearance
    • Reverse Clutch Reassembly
    • Checking Reverse Clutch Clearance
    • Final Assembly Of Input Clutch Assembly
  • Oil Pump
    • Disassembly & Reassembly
  • Valve Body
    • Disassembly
    • Reassembly
  • Differential Bearing Rotating Torque
    • Description
    • Adjustment
  • Output Shaft Bearing Preload
  • Transfer Shaft Depth
• Transaxle Reassembly
  • Differential Assembly & Transfer Shaft
    • Notes
    • Transfer Shaft
    • Differential Assembly With NEW Bearings & Components
    • Differential Assembly With Original Bearings & Components
  • Valve Body & Internal Components
  • Transfer Drive Chain & Sprockets
• Torque Specifications
• Transaxle Specifications