LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2003 >> Aurora >> Repair and Diagnosis >> External Pages >> Different car >> Section 151 (Front Suspension System) >> Front Upper Arm Removal/Installation >> Notes

Front Upper Arm Removal/Installation: Notes

WARNING: This page is about a different car, the 2004 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Performing the following procedures without first removing the ABS wheel-speed sensor may possibly cause an open circuit in the harness if it is pulled by mistake. Before performing the following procedures, remove the ABS wheel-speed sensor (axle side) and fix it to an appropriate place where the sensor will not be pulled by mistake while servicing the vehicle.
  1. Remove in the order indicated in the illustration.
  2. Install in the reverse order of removal.
  3. Inspect the front wheel alignment. If not as specified, adjust the front wheel alignment. See WHEEL ALIGNMENT .
Fig 1: Removing Front Upper Arm
G00356771Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals