LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2002 >> Aurora 3.5 H >> Repair and Diagnosis >> Suspension >> Electronic Suspension System - Automatic Level Control >> Repair Instructions >> Automatic Level Control Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Raise the vehicle.
  2. Remove the wheel from the vehicle. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  3. Disconnect the height sensor connector.
  4. Disconnect the sensor link from the ball stud.
  5. Loosen the sensor mounting nut.
  6. Disengage the anti-rotation tab and slide the sensor downward.
  7. Remove the sensor from the vehicle.
    Fig 1: Removing Automatic Level Control Sensor
    G01582135Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals