LEMON Manuals: Even more car manuals for everyone
Home >> Oldsmobile >> 2002 >> Aurora 3.5 H >> Repair and Diagnosis >> Suspension >> Electronic Suspension System - Automatic Level Control >> Repair Instructions >> Automatic Level Control Sensor Replacement >> Installation Procedure

Installation Procedure

  1. Insert the head of the sensor mounting stud into the key hole.
  2. Slide the sensor upward until the anti-rotation tab engages in the lower hole.
  3. Tighten the sensor mounting nut.

    Tighten 

    Tighten the nut to 9 N.m (80 in lbs).

  4. Connect the sensor link on the ball stud.
  5. Connect the height sensor connector.
  6. Install the wheel on the vehicle. Refer to TIRE AND WHEEL REMOVAL AND INSTALLATION .
  7. Lower the vehicle.
    Fig 1: Installing Automatic Level Control Sensor
    G01582136Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals