Delta 88 & Toronado
- Check circuit fuse by operating dome lights. Connect a test light to ground and check for 12 volts at Orange wire. If test light glows, connect test light between Orange wire and Black wire. If test light does not glow, check Orange and Black wire circuits.
- If a mirror does not operate, place mirror selector switch in position to operate inoperative mirror. Connect test light between Yellow and Lt. Green terminals of outside mirror switch. Check that test light glows when mirror control switch is in up and down positions.
- Connect test light between Dark Blue (Lt. Blue on Toronado) and White terminals of outside mirror switch. Check that test light glows when mirror control switch is in left and right positions.
- If test light glows but mirror does not turn, check wiring and motor. If test light does not glow when switches are in position to energize its terminals, install a new outside mirror switch.