Work Procedure
- Since vehicle specifications are not included in the AV control unit after replacement, it is required to write vehicle specifications with CONSULT.
- The AV control unit configuration includes functions as follows.
Function Description Read/Write Configuration Before Replace ECU Allows the reading of vehicle specification written in AV control unit to store the specification in CONSULT. After Replace ECU Allows the writing of the vehicle information stored in CONSULT into the AV control unit. Manual Configuration Allows the writing of the vehicle specification into the AV control unit by hand.
- WRITE VEHICLE SPECIFICATION
CONSULT Configuration: Write vehicle specification into AV control unit.
To write vehicle specification stored in CONSULT into the AV control unit>>
GO TO 2.
To write vehicle specification into the AV control unit by hand>>
GO TO 3.
- WRITE STORED DATA
>>
GO TO 4.
- MANUALLY WRITE VEHICLE SPECIFICATION NOTE:
- Grasp vehicle specifications precisely. The control of ECU may not function normally if the specifications are misread.
- The items shown in this list depend on vehicle specifications.
- The config list may not be displayed depending on vehicle specifications. This is not a malfunction.
- If selection items are not displayed on the CONSULT screen, touch "NEXT".
MANUAL SETTING ITEM Detail Items Setting value TELEMATICS WITH Models with telematics WITHOUT Models without telematics DAB FUNCTION WITH Models with DAB antenna WITHOUT Models without DAB antenna ETC 2.0 WITH Models with ETC 2.0 WITHOUT Models without ETC 2.0 NAVIGATION WITH Models with navigation WITHOUT Models without navigation SOUND SYSTEM BOSE With BOSE system NORMAL 4SPKS Without BOSE system (4SPKS) NORMAL 6SPKS Without BOSE system (6SPKS) NOTE:Some manual setting items may not be displayed, depending on the vehicle specifications.
>>
GO TO 4.
- OPERATION CHECK
Check that the operation of the AV control unit and camera images (fixed guide lines and predictive course lines) are normal.
>>
WORK END