Work Procedure: Procedure

WARNING: This page is about a different car, the 2020 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.

SAVING VEHICLE SPECIFICATION
CONSULT

Perform "READ CONFIGURATION" to save or print current vehicle specification.

Is vehicle specification saved normally?

YES

GO TO 2.

NO

GO TO 4.
REPLACE LANE CAMERA UNIT
Replace lane camera unit. Refer to LANE CAMERA UNIT : Removal & Installation .

GO TO 3.
WRITING VEHICLE SPECIFICATION
CONSULT

Perform "WRITE CONFIGURATION - Config file" to write vehicle specification.

GO TO 6.
REPLACE LANE CAMERA UNIT
Replace lane camera unit. Refer to LANE CAMERA UNIT : Removal & Installation .

GO TO 5.
WRITING VEHICLE SPECIFICATION
CONSULT
1. Select "WRITE CONFIGURATION - Manual selection"
2. Touch "Next".
3. Touch "OK".
4. Check that the configuration has been successfully written and touch "End".
GO TO 6.
OPERATION CHECK
Confirm that LDW/I-LI systems operate normally.
- LDW : Refer to Work Procedure .
- I-LI : Refer to Work Procedure .
Work End.