Work Procedure

PERFORM VCM RECOMMUNICATING FUNCTION
1. Install VCM.
2. Contact backside of registered Intelligent Key* to power switch while brake pedal is depressed, then turn power switch to the ON position.
  *: To perform this step, use the key that is used before performing VCM replacement.
3. Maintain power switch in the ON position for at least 5 seconds.
4. Turn power switch to the OFF position.
5. Check that the vehicle can be set to READY.
GO TO 2.
PERFORM ADDITIONAL SERVICE WHEN REPLACING VCM
Perform the following procedure Removal and Installation .

Inspection End.