Component Location

WARNING: This page is about a different car, the 2017 Nissan Versa Note. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of NISSAN NORTH AMERICA, INC.

Steering column assembly

No.	Component	Function
1.	Combination meter (EPS warning lamp)	Transmits mainly the following signal to EPS control unit via CAN communication: Vehicle speed signal (Meter) Turns ON the EPS warning lamp according to the signal from EPS control unit via CAN communication. For detailed installation location, refer to COMPONENT LOCATION (Type A) or COMPONENT LOCATION (Type B).
2.	ABS actuator and electric unit (control unit)	Transmits mainly the following signal to EPS control unit via CAN communication: Vehicle speed signal (ABS) For detailed installation location, refer to COMPONENT LOCATION .
3.	ECM	Transmits mainly the following signal to EPS control unit via CAN communication: Engine status signal For detailed installation location, refer to COMPONENT LOCATION .
3.	ECM	Receives mainly the following signal from EPS control unit via CAN communication: EPS torque signal
4.	EPS motor	Refer to EPS MOTOR, TORQUE SENSOR, REDUCTION GEAR .
5.	Reduction gear	Refer to EPS MOTOR, TORQUE SENSOR, REDUCTION GEAR .
6.	EPS control unit	Refer to EPS CONTROL UNIT .
7.	Torque sensor	Refer to EPS MOTOR, TORQUE SENSOR, REDUCTION GEAR .