LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Sentra SL >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System (Introduction, Wiring Diagrams And Basic Inspection) (With ICC) >> Basic Inspection >> Action Test >> Inspection Procedure

Inspection Procedure

  1. CHECK FEB SYSTEM SETTING

    1. Start the engine.
    2. Check that the FEB system setting can be enabled/disabled on the vehicle information display.
    3. Turn the ignition switch OFF and wait for 30 seconds or more.
    4. Check that the previous setting is saved when the engine starts again.

    GO TO STEP 2  .

  2. CHECK FEB SYSTEM

    1. Enable the setting of the FEB system on the vehicle information display.
    2. Check that FEB warning lamp is OFF.

    Inspection End.

scientia non olet · About LEMON Manuals