BSW System Operation Description
WARNING: This page is about a different car, the 2017 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
- ADAS control unit enables BSW system.
- The ADAS control unit turns on the BSW system when the warning system switch is turned ON.
- Side radar detects a vehicle in the adjacent lane, and transmits the vehicle detection signal to ADAS control unit via ITS communication.
- ADAS control unit starts the control as follows, based on a vehicle detection signal, turn signal and dimmer signal transmitted from BCM via CAN communication:
- Buzzer output signal transmission to combination meter via CAN communication.
- BSW indicator signal and BSW indicator dimmer signal transmission to side radar via ITS communication.
- Side radar transmits an indicator operation signal to the BSW indicator according to BSW indicator signal and BSW indicator dimmer signal.
OPERATION CONDITION OF BSW SYSTEM
ADAS control unit performs the control when the following conditions are satisfied.
- When the warning system switch in turned ON.
- When the vehicle drives at approximately 32 km/h (20 MPH) or more to the forward direction.
NOTE:
- After the operating conditions of warning are satisfied, the warning continues until the vehicle speed reaches approximately 29 km/h (18 MPH)
- The BSW system may not function properly, depending on the situation. Refer to PRECAUTIONS FOR BLIND SPOT WARNING .