Abs Function Starts Operating (Pressure Holds)
| Name | Not activated | During pressure holds |
|---|---|---|
| Cut valve 1 | Power supply is not supplied (open) | Power supply is not supplied (open) |
| Cut valve 2 | Power supply is not supplied (open) | Power supply is not supplied (open) |
| Suction valve 1 | Power supply is not supplied (close) | Power supply is not supplied (close) |
| Suction valve 2 | Power supply is not supplied (close) | Power supply is not supplied (close) |
| ABS IN valve | Power supply is not supplied (open) | Power supply is supplied (close) |
| ABS OUT valve | Power supply is not supplied (close) | Power supply is not supplied (close) |
| Each brake caliper and each wheel cylinder (fluid pressure) | - | Pressure holds |
Front RH brake caliper
- Since the ABS IN valve and the ABS OUT valve are closed, the front RH brake caliper, master cylinder, and reservoir are blocked. This maintains fluid pressure applied on the front RH brake caliper.
Front LH brake caliper
- Since the ABS IN valve and the ABS OUT valve are closed, the front LH brake caliper, master cylinder, and reservoir are blocked. This maintains fluid pressure applied on the front LH brake caliper.
Rear RH brake caliper/wheel cylinder
- Since the ABS IN valve and the ABS OUT valve are closed, the rear RH brake caliper/wheel cylinder, master cylinder, and reservoir are blocked. This maintains fluid pressure applied on the rear RH brake caliper/wheel cylinder.
Rear LH brake caliper/wheel cylinder
- Since the ABS IN valve and the ABS OUT valve are closed, the rear LH brake caliper/wheel cylinder, master cylinder, and reservoir are blocked. This maintains fluid pressure applied on the rear LH brake caliper/wheel cylinder.