LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2013 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 35 (Brake Control System (Coupe)) >> DTC/Circuit Diagnosis >> VDC Off Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different variant/trim than selected.
  1. CHECK VDC OFF SWITCH OPERATION 

    Press and release the VDC OFF switch, then press and release the VDC OFF switch again and check that the VDC OFF indicator lamp in the combination meter turns ON/OFF correctly.

    Condition VDC OFF indicator lamp illumination status
    VDC OFF switch: pressed and released ON
    VDC OFF switch: pressed and released again OFF

    Is the inspection result normal? 

    YES: Inspection End.

    NO: Go to diagnosis procedure. Refer to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals