LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2012 >> Cube Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Climate Control) >> Dust and Pollen Filter Replacement

Dust and Pollen Filter Replacement

WARNING: This page is about a different car, the 2013 Acura MDX, 2012 Acura MDX, 2011 Acura MDX, and 2010 Acura MDX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the glove box. Remove the glove box stop on right side, then let the glove box hang down (see GLOVE BOX REMOVAL/INSTALLATION ).
  2. Remove the dust and pollen filter assembly (A) from the blower unit.
    Fig 1: Locating Dust And Pollen Filter Assembly
    G08058005Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Remove the filter (A) from the housing (B), and replace the filter.
    Fig 2: Locating Filter And Housing
    G08058006Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the filter in the reverse order of removal. Make sure that there is no air leaking out of the blower unit.
scientia non olet · About LEMON Manuals