Removal and Installation: Installation

Install in the reverse order of removal paying attention to the following.

• Before tightening the fuel tank mounting straps, temporarily install the filler hose and the recirculation hose.

  Tighten all fuel tank mounting strap bolts to specification, then tighten the hose clamps.

• Connect the quick connector as follows:
  • Check the connection for damage or any foreign materials.
  • Align the connector with the tube, then insert the connector straight into the tube until a click is heard.
• After the tube is connected, make sure the connection is secure by performing the following checks:
  • Pull on the tube and the connector to make sure they are securely connected.
    Fig 1: Disconnecting Quick Connector

    Courtesy of NISSAN NORTH AMERICA, INC.
  • Visually confirm that the two retainer tabs are connected to the quick connector.

Fig 2: Checking Quick Connector Connections

Courtesy of NISSAN NORTH AMERICA, INC.