DTC Confirmation Procedure
CAUTION:
Always drive vehicle at a safe speed.
- PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, power switch OFF and wait for at least 10 seconds, then perform the next test.
GO TO 2.
- PERFORM DTC CONFIRMATION PROCEDURE
With CONSULT
- Set the vehicle to READY.
- Shift the selector lever to N position and wait for 10 seconds or more.
- Press the P position switch to shift to P position and wait for 10 seconds or more.
- Check DTC.
Is "P1897" detected?
YES: Go to "DIAGNOSIS PROCEDURE ".
NO: INSPECTION END