LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Xterra SE, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0603 To P2A03 >> P1421 Cold Start Control >> DTC Confirmation Procedure >> Notes

DTC Confirmation Procedure: Notes

NOTE: If DTC Confirmation Procedure has been previously conducted, always perform the following before conducting the next step.
  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON.
  3. Turn ignition switch OFF and wait at least 10 seconds.

TESTING CONDITION: 

Before performing the following procedure, confirm that battery voltage is more than 11V at idle. 

scientia non olet · About LEMON Manuals