LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> Sentra SE-R >> Repair and Diagnosis >> Steering >> Power Steering >> Power Steering System >> Service Information >> Steering Wheel >> Removal and Installation >> Removal

Removal and Installation: Removal

NOTE: When reconnecting spiral cable, fix cable with a tape so that fixing case and rotating part keep aligned. This will omit neutral position alignment procedure during spiral cable installation.
  1. Set vehicle to the straight-ahead position.
  2. Remove driver air bag module. Refer to DRIVER AIR BAG MODULE .
  3. Remove steering wheel lock nut after steering is locked.
  4. Remove steering wheel using Tool.

    Tool number A: ST27180001 (J-25726-A) 

    Fig 1: Removing Steering Wheel Lock Nut
    G04876858Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals