LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2009 >> 370Z Base, Standard >> Repair and Diagnosis (Single Page) >> Electrical >> Body Electrical >> Power Control System - 370Z >> Power Distribution System >> Component Diagnosis >> Push-Button Ignition Switch >> Component Function Check

Component Function Check

  1. CHECK FUNCTION
    1. Select "PUSH SW" in "Data Monitor" mode with CONSULT-III.
    2. Check the push-button ignition switch signal under the following conditions.
      DATA MONITOR REFERENCE

      Test item Condition Status
      PUSH SW Push-button ignition switch is pressed ON
      Push-button ignition switch is not pressed OFF

      Is the indication normal? 

      YES: INSPECTION END.

      NO: Go to "DIAGNOSIS PROCEDURE ".

scientia non olet · About LEMON Manuals