LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2008 >> Altima Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (Hybrid) >> Component Diagnosis >> P1195 Engine Does Not Start >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC P1195 is displayed with DTC P0201, P0202, P0203, P0204, first perform the trouble diagnosis for DTC P0201, P0202, P0203, P0204. Refer to "DTC LOGIC ".
  • If DTC P1195 is displayed with DTC P0335, first perform the trouble diagnosis for DTC P0335. Refer to "DTC LOGIC ".
  • If DTC P1195 is displayed with DTC P0340, first perform the trouble diagnosis for DTC P0340. Refer to "DTC LOGIC ".
  • If DTC P1195 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to "DTC LOGIC ".
DTC DETECTING CONDITION AND POSSIBLE CAUSE

DTC No. Trouble diagnosis name DTC detecting condition Possible cause
P1195 Engine does not start When the engine is abnormal, and the engine does not start.
  • Intake air leaks
  • Incorrect PCV hose connection
  • Mass air flow sensor
  • Electric throttle control actuator
  • Fuel injector
  • Fuel run out
  • Incorrect fuel pressure
  • Spark plug
  • Ignition coil
  • Ignition signal circuit is open or shorted
  • Insufficient compression