Terminal and Reference Value for Smart Entrance Control Unit
SMART ENTRANCE CONTROL UNIT TERMINAL REFERENCE
| Terminal | Wire color | Item | Condition | Voltage [V] (Approx.) |
|---|---|---|---|---|
| 1 | SB | Driver door switch | OFF (CLOSED) → ON (OPEN) | 5 → 0 |
| 2 | R/W | All door switch | OFF (CLOSED) → ON (OPEN) | 5 → 0 |
| 4 | PU | Door lock/unlock switch (UNLOCK) | Neutral → Unlock | 5 → 0 |
| 5 | GY | Door lock/unlock switch (LOCK) | Neutral → Lock | 5 → 0 |
| 25 | W/L | Ignition key switch (Insert) | Key inserted → Key removed from ignition key cylinder | Battery voltage → 0 |
| 26 | GY/L | Ignition switch (ACC) | Ignition key is in (ACC or ON position) | Battery voltage |
| 27 | G | Ignition switch (ON) | Ignition key is in (ON or START position) | Battery voltage |
| 31 | R/Y | Interior room lamp | When doors are locked using remote controller (Lamp switch in "DOOR" position) | Battery voltage |
| 42 | W/G | Horn relay | When panic alarm is operated using remote controller (ON → OFF) | 0 → Battery voltage |
| 43 | B | Ground | - | 0 |
| 47 | G/B | Hazard reminder (Turn signal lamp LH) | When door lock or unlock operated using remote controller (ON → OFF) | 0 → Battery voltage |
| 48 | G/Y | Hazard reminder (Turn signal lamp RH) | When door lock or unlock operated using remote controller (ON → OFF) | 0 → Battery voltage |
| 49 | L/R | Power source (Fuse) | - | Battery voltage |
| 50 | R | Battery saver (Interior room lamp) | Battery saver dose operate → does not operate (ON → OFF) | Battery voltage → 0 |
| 51 | W | Power source (PTC) | - | Battery voltage |
| 54 | R/B | All door lock actuator (Lock) | Door lock/unlock switch (Neutral → Lock) | 0 → Battery voltage → 0 |
| 55 | G/Y | Driver door lock actuator (Unlock) | Door lock/unlock switch (Neutral → Unlock) | 0 → Battery voltage → 0 |
| 56 | G/R | Other door lock actuators (Unlock) | Door lock/unlock switch (Neutral → Unlock) | 0 → Battery voltage → 0 |
| 64 | B | Ground | - | 0 |