KV381054S0
(J-34286)
Puller |
|
- Removing differential side bearing outer race (clutch housing side)
- Removing differential side bearing outer race (transaxle case side)
- Removing mainshaft front bearing
|
ST33400001
(J-26082)
Drift
- 60 mm (2.36 in) dia.
- 47 mm (1.85 in) dia.
|
|
Installing differential side oil seal (clutch housing side) |
ST35321000
( - )
Drift
- 49 mm (1.93 in) dia.
- 41 mm (1.61 in) dia.
|
|
- Installing input shaft oil seal
- Installing reverse main gear
- Installing 1st main gear bushing
- Installing 1st-2nd synchronizer hub assembly
- Installing 2nd main gear bushing
- Installing 3rd main gear
|
KV40105320
( - )
Drift
- 88 mm (3.46 in) dia.
|
|
Installing differential side bearing outer race (clutch housing side) |
ST33200000
(J-26082)
Drift
- 60 mm (2.36 in) dia.
- 44.5 mm (1.752 in) dia.
|
|
- Installing mainshaft front bearing
- Installing 6th input gear bushing
- Installing 4th main gear
- Installing 5th main gear
- Installing 6th main gear
|
ST30720000
(J-25405)
Drift
- 77 mm (3.03 in) dia.
- 55.5 mm (2.185 in) dia.
|
|
- Installing differential side oil seal (transaxle case side)
- Installing differential side bearing outer race (clutch housing side)
- Installing differential side bearing outer race (transaxle case side)
- Installing mainshaft rear bearing
- Installing differential side bearing (clutch housing side)
- Installing differential side bearing (transaxle case side)
|
ST33061000
(J-8107-2)
Drift
- 38 mm (1.50 in) dia.
- 28.5 mm (1.122 in) dia.
|
|
- Installing bore plug
- Removing differential side bearing (transaxle case side)
- Removing differential side bearing (clutch housing side)
|
ST33052000
( - )
Drift
- 22 mm (0.87 in) dia.
- 28 mm (1.10 in) dia.
|
|
- Removing input shaft rear bearing
- Removing 6th input gear, 6th input gear bushing, 5th-6th synchronizer hub assembly, and 5th input gear
- Removing 5th input gear bushing, 4th input gear, 4th input gear bushing, 3rd-4th synchronizer hub assembly, and 3rd input gear
- Installing input shaft front bearing
- Removing mainshaft rear bearing
- Removing 6th main gear
- Removing 4th main gear and 5th main gear
|
KV40105020
( - )
Drift
- 39.7 mm (1.563 in) dia.
- 35 mm (1.38 in) dia.
- 15 mm (0.59 in)
|
|
Removing 3rd main gear, 2nd main gear, 2nd main gear bushing, 1st-2nd synchronizer hub assembly, 1st main gear, 1st main gear bushing, and reverse main gear |
ST30031000
(J-22912-01)
Puller |
|
Measuring wear of inner bulk ring |
KV40105710
( - )
Press stand
- 46 mm (1.81 in) dia.
- 41 mm (1.61 in)
|
|
- Installing 3rd-4th synchronizer hub assembly
- Installing 4th input gear bushing
- Installing 5th input gear bushing
- Installing 5th-6th synchronizer hub assembly
- Installing 2nd main gear bushing
- Installing 3rd main gear
|
ST30901000
(J-26010-01)
Drift
- 79 mm (3.11 in) dia.
- 45 mm (1.77 in) dia.
- 35.2 mm (1.386 in) dia.
|
|
- Installing input shaft rear bearing
- Installing 4th main gear
- Installing 5th main gear
- Installing 6th main gear
- Installing mainshaft rear bearing
|
ST30032000
(J-26010-01)
Drift
- 80 mm (3.15 in) dia.
- 38 mm (1.50 in) dia.
- 31 mm (1.22 in) dia.
|
|
Installing input shaft front bearing |
ST38220000
( - )
Press stand
- 63 mm (2.48 in) dia.
- 65 mm (2.56 in)
|
|
- Installing reverse main gear
- Installing 1st main gear bushing
- Installing 1st-2nd synchronizer hub assembly
|
KV40101630
(J-35870)
Drift
- 68 mm (2.68 in) dia.
- 60 mm (2.36 in) dia.
|
|
Installing reverse main gear |
KV38102510
( - )
Drift
- 71 mm (2.80 in) dia.
- 65 mm (2.56 in) dia.
|
|
- Installing 1st main gear bushing
- Installing 1st-2nd synchronizer hub assembly
- Installing differential side bearing (transaxle case side)
- Installing differential side bearing (clutch housing side)
|
(J-39713)
Preload adapter |
|
Measuring end play of side gear |