LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2007 >> Sentra Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Continuously Variable Transmission (CVT)) >> Shift Position Indicator Circuit >> Diagnostic Procedure >> Notes

Diagnostic Procedure: Notes

WARNING: This page is about a different variant/trim than selected.
  1. CHECK INPUT SIGNALS 

    With CONSULT-III 

    1. Start engine.
    2. Select "MAIN SIGNALS" in "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-III and read out the value of "RANGE".
    3. Check that the following three positions or indicators are same.
      • Actual position of the selector lever
      • "RANGE" on CONSULT-III screen
      • Shift position indicator in the combination meter

    OK or NG 

    OK: INSPECTION END 

    NG: Check the following.

scientia non olet · About LEMON Manuals