LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2006 >> 350Z 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0441 To P0605 >> DTC P0451 EVAP Control System Pressure Sensor >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch OFF and wait at least 10 seconds.
  2. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and wait at least 40 seconds.
    NOTE: Do not depress accelerator pedal even slightly.

    If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

    Fig 1: Consult-II DATA MONITOR Display Screen
    G04074999Courtesy of NISSAN NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals