Adjustment of A/T Position

Move selector lever from "P" position to "1" position. You should be able to feel the detents in each position. If the detents cannot be felt or if the pointer indicating the position is improperly aligned, the control cable needs adjustment.

1. Place selector lever in "P" position.
2. Loosen control cable lock nut and place manual shaft in "P" position.
   CAUTION: Turn wheels more than 1/4 rotations and apply the park lock.
3. After pushing the control cable with the specified force, move your hands off the control cable.

   Specified force: 9.8 N (1.0 kg, 2.2 lb) 

   Fig 1: Locating Manual Shaft Nut

   Courtesy of NISSAN MOTOR CO., U.S.A.
4. Connect control cable on manual shaft.
   CAUTION: No application of a force to the manual lever.
5. Tighten control cable lock nut.
6. Move selector lever from "P" to "1" position again. Make sure that selector lever moves smoothly.
7. Apply grease to contacting areas of selector lever and control cable. Install any part removed.